The meaning of using a wire rope to adjust the welding pipe mold is to use the wire rope as the reference line for adjustment, which is relatively simple to operate. So how should we use the wire rope to adjust the model of the welding pipe mold? Let's take a look.

The purpose of using the wire rope to adjust the welding pipe mold is to be fast and efficient, because after the wire rope is pulled, this is a relatively straight reference line, which is used as a reference, and the speed of adjusting the mold is faster. Firstly, we need to find a wire rope with a length greater than the main part of the unit, then thread the wire rope through the hole of the welded pipe mold, and fix it. This should be noted that the fixed position of the wire rope must be based on the center position of the upper edge of the bottom diameter of the horizontal mold, both front and back, and then fix it again. Finally, adjust the position of other molds based on the fixed wire rope position, including the horizontal height and center position. The mold adjusted in this way not only operates quickly, but also has efficient calibration.

Adjusting the Welding Pipe Mold with wire rope before threading can greatly improve work efficiency and accuracy. In the later production of pipes, simple fine adjustments can achieve good results. If you don't believe it, you can also try it out.

Key words:Welding Pipe Mold

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com