There are many ways to install a welding pipe machine, especially for horizontal position calibration. Today, we will take a look at how to use a level to adjust the horizontal position of the welding pipe machine.

When using a level to adjust the welding pipe machine, I personally recommend taking 6 points for calibration. Normally, many people only calibrate 4 points, which are the four corners of each unit. I don't think it's very reasonable, so I should take 2 more points in the middle for calibration because some units are too large and may have collapse defects in the middle. Even small ones should be taken seriously.

After taking the six points of the welding pipe machine, fix the level gauge, then take a reference rod, mark the reference line at one point, and then adjust the remaining stores accordingly at this point. Finally, perform the alignment inspection once, and it is basically the same. The operation is also relatively simple.

Do you know how to use a level to adjust the welding pipe machine now? If you still don't know, buy our welding pipe machine and welding pipe mold, and we will provide on-site service.

Key words:welding pipe machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com