Stainless steel pipe making machine is a professional equipment used for producing stainless steel welded pipes. As it is a straight seam welded pipe, it is necessary to clean the weld seam online. This requires the installation of a grinding seat to grind the weld seam. So, what adjustments should be made to the grinding seat? Is there any way to guide and reference it? The answer is yes.

The polishing seats of stainless steel pipe making machines generally vary from 1 to 4, depending on the size and process requirements of the production pipe. However, regardless of the quantity, the adjustment method is the same.

First of all, we need to install the polishing seat of the stainless steel pipe making machine. After installation, adjust the angle of the polishing seat. Take three groups of polishing heads as an example, the front two are polished at a 45 ° angle, and the rear one is flat polished. The position adjustment of the polishing wheel should refer to two lines: one is the centerline of the unit, which should ensure the center position of the welding seam after polishing, and the other is the lower edge of the bottom diameter of the horizontal axis upper mold. This line is the specific height position of the polishing, adjust the angle, install the polishing wheel, and then install two lines to adjust it. During polishing, there will be basically no major problems.

Now that you know the adjustment method for the polishing seat of the stainless steel pipe making machine, go and practice it.

Key words:Stainless Steel Pipe Making Machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com