The unloading frame of the stainless steel pipe welding machine is a device used for centralized collection of the cut pipes. According to the different control methods and designs, there are also not small differences. Today, our Foshan GXG Technology Co., Ltd. brings Let's learn the control method of the unloading frame of the stainless steel welded pipe machine together.

The unloading frame of the stainless steel pipe welding machine is relatively simple in a V-shaped design, and then the air cylinder controls the turning and unloading. There are two stroke signal baffles on the unloading frame, which control the cutting signal and the blanking signal respectively. Now this mode It has been modified again. There is only one travel switch. It should be the electronic control part that has been adjusted.

There is also an encoder control, so there is no need to use the travel signal. The meter wheel controls it. After getting the distance model, the cutting is performed. The unloading is time-controlled. For small-diameter pipes, because the small-diameter pipes are not easily touched by subsequent pipes, a feeding motor is installed, and then the material is unloaded.

There is another kind of unloading rack of stainless steel pipe welding machine with sorting function, which can distinguish and sort good and bad pipes according to signal control.

The control method of the unloading frame of the stainless steel pipe welding machine is introduced here. If you need it, you can come to our Foshan GXG Technology Co., Ltd., and we will help you design it.

Key words:stainless steel pipe welding machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com