The spacer is often used in stainless steel pipe mould. How to design the spacer is related to the stability of operation and the certainty of position. If the spacer design is not good, then the best pipe mold can not play its role.

The specific function of the stainless steel pipe mould spacer is to adjust and fix the distance. For example, the thickness of the horizontal axis pipe mold is limited, and the spare part needs to be filled with the spacer. When filling in the blank, the pipe mold should be in the central position, so the thickness of the spacer needs to be considered, even if it cannot be absolutely accurate, It is also necessary to be relatively accurate. Only in this way can the spacer sleeve of the vertical shaft tube making die be used to adjust the height and position of the die. All these should be considered. When processing the spacer sleeve, we should pay attention to the processing method. It is not enough to cut down a simple sleeve. We should also pay attention to the flatness, so as to avoid causing relatively large wear to the die, which will affect the later accuracy.

Stainless steel pipe mould spacer design or more exquisite, a small sleeve has a complex content, not simple.

Key words: stainless steel pipe mould

Foshan Senwel technology - GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)