During the production of welded pipe mechanical equipment, did you notice a defect that the vertical shafts of some welded pipe mechanical equipment can not be connected in the center. If this happens, how to deal with it?

The welded pipe mechanical equipment with this defect are basically factory defects, that is, original design defects or processing defects. If it is a design defect, it can be seen from the drawings that this error is relatively low, because this is an arithmetic problem, which also shows that the quality of designers is very poor or distracted. If it is a processing error, It's either dazzled or careless. However, this problem can not be solved by supplement, as long as it is reprocessed.

This situation of welded pipe mechanical equipment is generally an industrial pipe making machine, because the arch design of the vertical shaft is different, and this is basically a cover plate problem, which has little impact on the main body. It is good to reprocess the cover plate.

Key words:welded pipe mechanical equipment

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com