For many high frequency welded pipe enterprises, how to reduce the water storage in the pipe production process of high frequency welded pipe unit is a difficult problem. They don't know how to deal with it. You can see this article today, and there are the answers you need.

There will be a lot of water when the high-frequency welded pipe unit produces pipes. The water is mainly the cooling water of the welded pipe unit and the cooling water of the high-frequency welding machine. The water will flow into the pipes along the pipe making process, so you can see that the site of the welded pipe unit is often wet. That's the reason. How to avoid or reduce this problem? Here is a special one The device is called water blocking sponge rod. This sponge rod is installed behind the magnetic rod. When the water of the welded pipe unit enters the pipe, it has to pass through the magnetic rod. The magnetic rod has blocked part of the water. In addition, a sponge rod is equipped behind it. The sponge rod can be well sealed in the pipe with its own shrinkage, so as to block the remaining water, which greatly reduces the water consumption After the pipe inside the water, and then a simple blow inside the pipe hole, you can remove most of the water, so that the corrosion resistance of the pipe is much better.

See here, how to reduce the moisture in the high frequency welded pipe unit, do you have the answer? If necessary, find Shengwei technology - pipe rust steel.

Article by: high frequency welded pipe unit 

http://www.fsgxiug.com Foshan Senwel technology - guanxiugang-gxiug finishing supply