It is a topic for welded pipe mould manufacturers how to process the hole position properly and achieve a relatively standard. It is not just a matter of random processing. There are some principles and methods in this process.

First of all, we need to understand that the welded pipe mould is processed by the lathe. When it is fixed, we should pay attention to the parallelism. If the deflection occurs when it is fixed, then the production must be eccentric. Therefore, the effective way to find the parallelism is to use the run out meter to detect, because the visual inspection can not get the requirements, and use the run out meter to correct and detect the mold The perpendicularity and run out of material ground and round surface ensure the standard of blank.

When the blank is put on the drilling machine to process the hole, it is necessary to check the jumping condition with the jumping meter first, and whether the place is stable. If there is deviation, the drilled hole must be eccentric, so the welded pipe mould produced is certainly not standard.

Welded pipe mould manufacturers should be how to open more appropriate, more standard, now you understand, the next time we visit welded pipe mold must pay attention to Oh.

Article by: welded pipe mould manufacturer 

http://www.fsgxiug.com Foshan Senwel technology - guanxiugang-gxiug finishing supply