When using the pipe making machine, we will encounter some problems that we thought should not happen, but in fact, there are very low-level errors. Today, I will explain to you a low-level error I encountered, and tell you how I handled it. This is that the vertical roller of the welded pipe roller can not be centered tightly. I don't know if you have encountered it, So how to deal with and solve this problem?

First of all, we should analyze the reason why the vertical roller of welded pipe roller can not be close. What is the reason? It may be the tolerance error caused by machining, which makes the workpieces unable to connect and close. Another possibility is that it is not considered in the design. This occurs in many designs of industrial pipe welding machines. Sometimes the surface uses cover plates, and the opening spacing of cover plates is too large, which makes it impossible to close, or the bottom diameter of welded pipe mold is too small, These problems are relatively low-level and easy to deal with.

The second is to check whether the workpiece processing meets the needs. If it cannot meet the needs, it can only replace the workpiece.

In fact, no matter what the problem is, as long as we find the cause of the problem, it will be easier to deal with. For design problems, we will modify the design again. Because the design causes workpiece processing problems, we will modify the workpiece again. For workpiece quality problems, it is necessary to re select workpiece materials and processing. These are very simple to deal with.

Seeing these, we are not nervous. The vertical roller of the welded pipe roller can not be centered, but it is a rare situation. As long as we carefully analyze it, we can find a solution soon.

Key words:welded pipe roller

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com