Pipe machines can be divided into stainless steel pipe machines and high-frequency welded pipe machinerys according to their materials. Stainless steel pipe machines are generally used to produce stainless steel pipes, while high-frequency welded pipe machinerys produce carbon steel and galvanized pipes. Pipe making machines can be divided into straight welded pipe machinerys and spiral welded pipe machines according to their forming methods. However, no matter which pipe machines, online cutting is required. Here, we will talk about how to adjust and control the cutting of pipe machines of straight welded pipe machinerys, and get good cutting results.

The first is stroke adjustment. Only by adjusting the travel of the cutting machine to a suitable position can good results be obtained in the original state. Stroke adjustment is equivalent to large-scale movement distance adjustment.

Secondly, it is the air pressure adjustment of the pipe machine, which is to give enough pressure to the cutting machine, so as to meet the requirements of cutting strength, and avoid the problems of incomplete cutting or slow return journey.

Finally, it is necessary to set the parameters of the cutting machine, which is equivalent to micro-adjustment, where to drop the saw, and control the time of falling and sawing back, etc. These are all very important.

Only by taking these factors into account, can the cutting effect be effectively controlled and the cut pipe be beautiful.

Article by:pipe machine  welded pipe machinery      http://www.fsgxiug.com 

Foshan Senweltechnology - guanxiugang-gxiug finishing supply