Many people are not very clear about the thin wall drawing welding pipe machine, because many people have not seen it, let alone used it. Today, our pipe rust steel technology will tell you about the advantages and disadvantages of the thin wall drawing welding pipe machine, and take you to make a simple analysis.

First of all, thin wall drawing welding pipe machines are generally used for the production of thin-walled pipes. Many of them are less than 0.5mm thick, and some of them will be greater than this thickness, but the pipe diameter will also be much larger.

Secondly, the rear section of the thin wall drawing welding pipe machine is mostly matched with the tank machine, that is, the drawing system, which looks like the same equipment as the tank chain, so we call it the tank machine.

Based on the above, when welding thin-walled pipes, the advantages of drawing pipe welding machine appear. The deformation control is relatively simple, unlike roller die forming, it is much more complex. The disadvantage is that the production specifications of the model are relatively single in most cases. It is troublesome to replace the mold, because it is not only to replace the forming card board, but also to replace the chain rail of the tank machine, which is a lot of trouble. Therefore, many times, the thin-wall pipe drawing and welding machine only produces one specification, which is called special machine in the industry, which causes waste.

If you have a thin-walled tube that sells well and has a large quantity, you can consider the design of thin wall drawing welding pipe machine. If not, try not to use this method for a long time, which is troublesome for investment and use. If you have to use it, there is no way. After all, meeting customer needs is what we need to do.

Key words:thin wall drawing welding pipe machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)