The cooling water mechanism is still important for all kinds of welded pipe mechanical equipment. Does the forming section of welded pipe mechanical equipment need cooling water? This depends on the specific situation.

For the mechanical equipment of high-frequency welded pipe, the whole production line needs cooling and lubrication, because the operation speed is very fast. If it is not cooled, the quality of the pipe will be difficult to control. If it is operated at high speed without cooling, the pipe will be easy to deform and easily strained.

For the mechanical equipment of stainless steel argon arc welded pipe, the cooling water mechanism does not have to be used in the forming section, which depends on the specific materials and requirements. In general, the forming section does not use the cooling water mechanism, and the cooling water control is not good, so it is easy to have perforation in welding. However, when some soft steel strips are encountered, some cooling water or lubrication mechanism needs to be used, which is to reduce the scratch on the surface of the steel strip, so as to improve the quality of welded pipe.

No matter what type of welded pipe machinery and equipment, whether the forming section needs cooling and lubricating water mechanism should be analyzed and treated according to the specific situation, so as to make better pipes.

Key words:welded pipe mechanical equipment

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)