How many sets of straightening head weld pipe mold combination is more appropriate?There is no unified statement or regulation, and ultimately it all depends on the customer's model.However, when purchasing welded pipe equipment, the customer will have to consider the type of pipe to be produced, because this is one of the factors affecting the design of welded pipe equipment.

For example, some manufacturers to commonly used round pipe as the main production range, so the purchase of welded pipe equipment is generally configured with a straightening head,so two welded pipe mold configuration is enough.Because the sizing section of the pipe making machine has been shaped into a round pipe, the straightening head only needs a simple correction.The configured welded pipe mold does not need too much, which can also save some production costs for the production enterprise. Some require the use of a set of four round pipe straightening head welded pipe mold, which is not a problem. However, for the engineer of the factory, the technical requirements are much higher, because the experience is not enough, 4 welded pipe molds for the straightening head production of round pipe, it is a little difficult.

For some customers, the pipe materials are mainly square pipe and special shaped pipe, so two straightening ends are generally configured, and each straightening head has a set of four welded pipe molds. Sometimes, when producing square pipe and rectangular pipe, a set of two welded pipe molds will also be used.

There are also some customers processing pipe material for the large thick pipe, this time the welded pipe equipment configuration of the straightening head is generally 3. The configuration of welding pipe with straightening head is the same as that of square pipe and special shaped pipe, but the adjustment difficulty of 3 straightening heads is higher than that of 2 or 1 straightening heads. We don't have to say much about this, but we all understand it.