The overload of stainless steel welded pipe equipment is a common fault in daily production, but it is also easy to deal with. Generally, it is caused by heavy load and overload operation. What should be done when the grinding overload of stainless steel welded pipe equipment occurs?

First of all, we should confirm whether the reason for grinding overload is line fault or pressure load overload. If it is a line fault, it needs to be checked a little. There are many things such as motor lines and frequency converter settings. If the pressure load is too large, it is much simpler. It can be eliminated by lifting the grinding head a little. However, the actual overload of the motor has been eliminated, but the fault information cannot be eliminated. What should we do?

When the grinding overload of stainless steel welded pipe equipment has been eliminated and the fault code cannot be eliminated, the line should be checked, mainly because the reset signal has not been cleared. At this time, it is only necessary to manually find the thermal relay of relevant control elements and reset it.

Because our stainless steel welded pipe equipment has considered the operating load and designed the relevant overload program protection in the electronic control design, there is no need to worry when there is an overload fault. It is only an active defense designed by us. We only need to deal with the relevant programs. After all, prevention is much better than rearranging afterwards.

Key words:stainless steel welded pipe equipment

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com