For welded pipe companies, a problem that welded pipe masters are unwilling to appear is the deviation of the weld seam when the welded pipe machinery and equipment appear. Whether it is a stainless steel pipe making machine or a high-frequency welded pipe machine, if there is a problem, deal with this problem. It's easy to get up, but if you don't handle it well, deviations will occur again. How to deal with it?

Let's take the stainless steel pipe making machine to say that when the pipe making machine occurs, the welded pipe has seam deviation, then the position of the welded seam will occur, and the weld cannot be welded if it changes, resulting in a decline in the yield and causing great losses to the welded pipe enterprise. The position of the deviation of the repair welding seam of the stainless steel pipe lies in one key point. One welding position is deviated, and the other is that the specific position or section cannot be deviated. Welding deviation is about to appear false welding. In the case of failure, if the position of the weld is off, there will be a defect that the weld cannot be repaired, so it is very important when the weld is off. When the welding seam is found to be out of alignment, the position of the welded pipe mold must be timely and timely. We will correct the deviation by adjusting the vertical roller in the relevant position. Which side of the welding seam is deviated, we move the vertical roller to which side, so that the welding can be carried out. If the seam is adjusted to the other side, and the sample is proofed, the deviation of the welding seam will basically not have a big impact, so there is no need to worry.

When your stainless steel pipe making machine produces welded pipes, has there been any deviation of the weld seam? How did you deal with it? Welcome everyone to discuss and make progress together.

Key words:stainless steel pipe making machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)