When it comes to the combined welded pipe mechanical mold frame, do you feel very fresh? I believe many people will do so, because they may not have seen it, but the design of the combined welded pipe mechanical mold frame also has its advantages and disadvantages. Today, Foshan GXG Technology Co., Ltd. will bring you together for a simple analysis.

I think the better advantage of the combined welded pipe mechanical mold frame is that it can greatly reduce the cost of the die. Because it is a combined die, the size of the die is relatively small. In this way, it saves a lot of costs in terms of material cost. In addition, because the size is small, the processing is also simpler and lighter. In addition, the mold strain in the process of pipe welding can be controlled or reduced, which are obvious advantages.

The disadvantage is that the frame must be designed and processed accurately, otherwise there will be relatively large deviation, so the installation and debugging of the mold will be more difficult, especially the installation of the left and right side rollers. This is very key, because there is no accurate measurement method, so the error must exist. You need to be very careful during debugging. If you don't pay attention, there will be waste products.

Let's talk about the advantages and disadvantages of the combined welded pipe mechanical mold frame. If you have a better design, you can discuss it with our GXG technology and make common progress.

Key words:welded pipe mechanical mold

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com