Stainless steel internal leveling equipment is the equipment for on-line weld leveling of stainless steel welded pipe. It needs to install 4 pipe making moulds and 1 mandrel. However, the design of pipe making mold of internal leveling equipment is different from that of conventional equipment. The following points should be paid attention to.

The first is the size of the pipe making mould. The internal leveling equipment is still very strong. To flatten the weld reinforcement, it requires that the hardness of the mold surface should be large, and the size should be larger. For the same specification of pipe making mold, the bottom diameter of the internal leveling mold should be large, and the edge should be thick.

The second is to pay attention to the design of the shape. When designing the upper and lower rollers of the pipe making mould for the stainless steel internal leveling equipment, the built-in mandrel should be considered. If the design is too round, the tube will be extruded. All these should be paid attention to.

The design of stainless steel inner leveling pipe making mould is very particular. If the design is not good, it will take a lot of effort to produce pipes. In this way, the welded pipe enterprises will be unhappy. To make inner leveling mold, we need Foshan senwel - GXG technology, which is easy to use.

Key words: pipe making mould

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com