The speed of high-frequency pipe welding machine is very fast, so the design requirements of high frequency welded pipe mold are also exquisite. It is necessary to carefully design the bottom diameter and edge thickness of the die, otherwise it is difficult to carry out production.

The bottom diameter of the high frequency welded pipe mold is generally twice or more than the machine shaft diameter. If it is lower than this design requirement, other design factors need to be paid attention to. Because the pipes produced by many high-frequency welded pipe machines are relatively thick, the edge thickness of the high-frequency welded pipe mold should be relatively thick, at least 5mm larger than that of the conventional welded pipe mold, This is more easy to use.

If you are producing high-frequency welded pipe, you might as well see if your high frequency welded pipe mold is designed like this.

Key words:high frequency welded pipe mold

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com