Recently, I saw a customer use high frequency welded pipe equipment mode to produce stainless steel pipe making machine, the effect is much worse, and the design of the unit is also very unreasonable. This customer may not have used it before, and was hoodwinked by the high-frequency welded pipe equipment manufacturer.

Can we produce stainless steel pipes with high frequency welded pipe equipment? The answer is yes, but the design of the unit should pay attention to the cooling system. The machine of that customer doesn't even have the basic cooling system. How to remove the friction between the steel strip and the mold, and how to cool down and lubricate the friction between the later pipe and the mold, All these must be considered. Don't underestimate the difference. It will lead to poor tube forming and unstable tube after forming. The main problem is that the friction temperature is not controlled, so the possibility of thermal deformation can't be ruled out, and the tube size is not standardized.

In order to produce stainless steel pipe making machine with high frequency welded pipe equipment mode, we must pay attention to the rationality of design layout, and also consider the variability factors, so as to design a good equipment.

Key words:high frequency welded pipe equipment

Foshan Senwel technology - GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)