Stainless steel pipe moulds are divided into forming molds, welding molds, sizing molds and straightening molds. Today, let's talk about how to design the pipe mold with straightening head. Is it two designs or four designs?

The stainless steel pipe mould on the straightening head shall be designed according to the pipe type. Here we will briefly talk about the conventional round pipe and square (also including rectangle, because the principle is the same). The round pipe and the pipe mould in front are the same. A set of two designs can be adopted. In some places, it can also be seen that there are four combinations, These designs are not available, but the operation of two is simpler than that of four, and the processing of pass is also simpler. For square and rectangular pipes, the pipe making die of the sizing section in front of the straightening head has begun to deform, and two straightening heads are used, unlike one round pipe. The first group of straightening head pipe moulds adopts primary deformation, while the stainless steel pipe mold of the second straightening head needs complete deformation, and it is not easy to achieve the pipe type and size standard. Generally, the simple pipe type will also adopt the combination of two pipe making molds, but more use four combination methods.

How to design the stainless steel pipe mould on the straightening head should be designed according to the pipe type and the master's operation habits. If there are no special requirements, it can be designed according to the general situation.

Key words:stainless steel pipe mould

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)

E-mail： 345291578@qq.com