Why should I tell you about the matching of molds of stainless steel pipe making machine today? When some customers come to our factory to chat, they reflect that the welded pipe mould produced by some other suppliers is not very easy to use and the forming is unstable. Them hope we can redesign and produce a new set of pipe mould of stainless steel pipe making machine for improvement. There are many such situations, so I'll take them out and tell you.

Different stainless steel pipe making machine mold manufacturers have different designs. For example, when you use the pipe making mold of manufacturer a, it is found that one group is inappropriate and needs to be repaired or replaced. However, manufacturer a has handled it many times and is still not ideal, so you need to go to manufacturer B for communication and treatment. If some manufacturers are not suitable, replace the other group, Some need to replace several groups of pipe making molds. Which is the right one? In fact, in my opinion, they are not very correct, because these need specific consideration.

First of all, if you know the size and design drawing of the original stainless steel pipe making machine mold, it is possible to repair and replace as little as possible, but not every mold drawing is the same, so it is unreasonable.

The second is to consider the location of the mold that needs to be modified or replaced. Different locations are handled differently. Sometimes it is necessary to replace a section to solve the problem.

Therefore, if there is a problem with the mold of your stainless steel pipe making machine, I suggest you look at the mold position first. If it is more sensitive, I suggest that the overall replacement is the best, because in this way, there will be no problem of unclear responsibility and the cost will be better reduced.

Key words:stainless steel pipe making machine

Foshan GXG Technology Co., Ltd

web: http://www.fsgxiug.com

Tel: 86-18820879368(Wechat-Whatsapp)