Pipe welding molds are necessary hardware accessories for the production of metal welding pipes, so how are pipe welding molds produced? 

According to the customer's order requirements and pipe welding equipment pattern parameters, etc., the welded pipe mold manufacturer needs to purchase the mold material back, and then cut the blank, open the blank, rough turning, drilling, finish turning , heat treatment, finish turning again and polish. Finally, after the factory inspection, if there is no problem with the quality, it can be packaged and shipped.

Don't underestimate the processing process of each pipe welding mold. There are exquisite processing techniques. For example, the rough turning cannot be overdone, and leave a margin for the finish turning, and the margin should not be too much, otherwise it will easily cause the CNC lathe to abrade too quickly. Similarly, the first finishing turning should leave a margin for the second finishing turning, because after the heat treatment of the pipe welding mold, there will be slight deformation of thermal expansion and contraction, which needs further correction. Each step must be considered before and after, and a small error can cause a large final error.

Is there a basic understanding of the pipe welding molds process? So you must pay more attention when choosing the mold in the future, if it is too cheap, it is estimated that it has been cut corners or reduced the process. In this way, the quality of the mold is not good. If you want to choose some quality guaranteed pipe molds, you can choose Senwel Pipe Mold Machinery Co., Ltd.(Foshan Guanxiugang Trade Co., Ltd.). We guarantee quality and quantity, and strive to achieve perfection.